FISHERY AERATION PRODUCT RANGEAquaJet -
BEST SELLER ! £1,695 + VAT
Ideal for Lakes 1- 2 Acres in size
The AquaJet is derived from the highly successful and reliable AquaPilz design. It differs by having a specially developed, adjustable deflector on top of the aerator. This focuses the fountain into a powerful directional jet. Although this current is less powerful than AquaWheel aerators (watt for watt), it is suitable for use in icy conditions. Thus it can play an important rôle in keeping areas ice-free. Like the AquaWheels, it is particularly suited to longer fisheries. It is available with a choice of 4 motor sizes, the largest only in 380v, 3 phase.
The deep water of lakes is often cold and oxygen-poor. Sometimes, in the warmer months, the lake can stratify. Thermal stratification takes place where the surface, warmer water, floats on top of the denser, cold water, and doesn’t mix easily. This can cause serious problems. Being isolated from the surface, there is no effective exchange of gases with the atmosphere. Consequently, toxic gases such as methane, hydrogen sulphide and carbon dioxide cannot escape, and the bottom becomes starved of oxygen. Not only does this area then exclude fish (as it is toxic) but the healthy breakdown of dead organic matter cannot take place. So, black toxic mud steadily accumulates from dead leaves, algae, fish waste and anglers baits. This not only forms a reservoir of nutrients to support algal blooms, but can cause a catastrophic deoxygenation and loss of fish stock if the mud suddenly becomes mixed with the main body of water (this sometimes happens in the summer or autumn, with a sudden fall in atmospheric pressure or a sudden cold snap).These aerator types can prevent these problems by continually bringing deep water to the surface.
>>>Download the AquaJet Product Brochure Here
AquaHobby
Ideal for Lakes to 0.5 Acres in size
This machine is made in two types each with two motor options
Submersible motor types are suitable for use in winter, and help keep areas ice-free.
 |  |  |
| AquaHobby submersible | AquaHobby | AquaHobby fountain pattern |
>>>Download the full product brochure for the Aqua Hobby HereAquaMini
Ideal for Stock Ponds and large garden ponds
This floating aerator is designed for small ponds, and has a 230v motor which can be regulated. It's compact size, and slot-perforated aluminium screen lends itself to use in breeding or fry ponds. It is available with a choice of screen slot dimensions; 2 x 20 or 6 x 20mm. The screen basket is easily removed for rapid cleaning.
 |  |
| AquaWheel 0.55kW in action | AquaWheel 1.1kW - extremely powerful ! |
The AQUA-WHEELpaddlewheel aerators work by considerably increasing the surface area of the water, giving much improved exchange of gases between the air and water. They do this by breaking the water into tiny droplets and flinging them up into the air. The droplets are then able to take up oxygen and discharge to the atmosphere polluting gases, such as carbon dioxide. An added benefit is the increased circulation of the water, which distributes the oxygen-enriched water. AQUA-WHEEL requires almost no maintenance. The paddle wheels turn slowly, and are only slightly submerged in the water, so in most cases a protective screen is not required.
The AQUA-WHEELaerator is available in a variety of sizes to suit individual requirements. Common to all sizes is the exceptionally buoyant float. With AQUA-WHEEL, we have made ease of use a priority. AQUA-WHEEL is relatively light-weight, so making it easy to install in the desired position. Practical carrying handles are moulded directly onto the sides of the float. Fastening and anchoring could not be easier. This can be achieved either by means of a fastening rope in the form of a V, or by a single rope attachment, or even by a locking mechanism on rods. This allows for assembly and dismantling on your pond. Materials AQUA-WHEEL is driven with a high
quality, slow running electric motor (IP55). The motor is mounted above the water surface. Power from the motor is transmitted by a simple tooth belt drive (except the 0.25 kW, where a gear motor is used). This results in reliable operation, long life and minimal energy consumption. Paddle-wheel-aerator aerator for aquaculture, fisheries and ornamental lakes, seas and canals Aqua-Wheel 0,37 kW with brush wheels (generating a strong flow). The wheels are connected to a one-piece stainless steel shaft held by sealed ball-bearings. For the mountings, shafts and screws, only stainless steel is used. The float and the motor cover are made of robust, UVresistant polyethylene. The paddle wheel has been specially developed for aeration function, maximising both the transfer of oxygen, and the dispersal of waste gases. The shape of the wheel and the paddles guarantee optimum water circulation and distribution with minimum power requirements. Its design creates a powerful current, making this aerator especially valuable where flow is required. The paddles are robust and durable, and can be replaced quickly and easily. AQUAWHEEL is supplied ready to use, complete with cable and motor-protection-device
>>>Download the full product brochure for the Aquawheel Here
AquaPilz "Mushroom" aerators  |  |
| AquaPilz submersible | AquaPilz special fountain version |
| |
These aerators all direct and disperse water above the water surface in a "mushroom" spray pattern. They are extremely efficient in operation, and are available with submerged or surface motors. They are particularly suited for use where the proportions of the lake are similar, ie approximately square or circular. They are both similar in effect and efficiency, but each has it's advantages. Depending on the power of the motor, they can spread the aerated water in an area up to 55m (180') diameter The submerged-motor version is itself mostly submerged, and is thus very unobtrusive when switched off. It can also be used when the air temperature is below freezing to keep water ice-free. AquaPilz with surface motors have a lower capital cost, and are an ideal way to oxygenate water inexpensively and reliably. . They are all robustly made, and have stainless steel bar screens (apart from AquaMini, which is aluminium) which are not prone to blocking. Standard bar spacing is 9.5mm, with narrower or wider available to order
 |  |
| AquaPilz submersible | AquaPilz |
| | |
>>>Download the full product brochure for the AquaPilz HereTo discuss installing our fishery aeration systems in your lake please contact our fishery management office for a full colour brochure and advice on what system is best suited to your lake
Telephone 0844 335 0347 or email us via the
contact page on this website
